2008 Road and Bridge Standards


Welcome to the 2008 Road and Bridge Standards website. The electronic version of the 2008 Road and Bridge Standards is based on the published edition dated December, 2008 and contains all revisions issued since the publication of the 2001 Road and Bridge Standards. The following sections provide links to the electronic standard documents in this manual for projects on the June 2009 and later advertisement schedule.

Please Note VDOT's Standard Drawings are not distributed or offered in any CADD format (example microstation.dgn or autocad.dwg).

2008 Road and Bridge Cover letter
 

  • Complete Manuals
    • The complete manuals volumes 1 and 2 may be downloaded and printed.  The manuals have been formatted to print 2 sided in a landscape orientation. 
          
      Volume 1 (24.51 MB)
      Volume 2 (19.42 MB)

     

    Documents


    • Table of Contents
      • Comprehensive listing of all standard sheets, including all revisions, categorized by section.

         

    • Complete Sections
      • Section by section files comprised of only the current version of each standard.

         

    • Revision Index
      • Listing of all published revisions to the standards, including each revision letter and the standard sheets included in each revision. Revised: October 2014

    • Insertable Sheet List
      • Listing of all published revisions to the standards, including each revision letter and the standard sheets included in each revision. Revised: October 2014

         

    • Metric TC-5.01 and TC-5.04
      October 2009




     

    Additional Information


    All files available on this website have been formatted as .PDF files and can be viewed by using Adobe® Reader®.  If you do not have this software, it is available for download on the Adobe website (www.adobe.com).  For instructions on the use of Adobe® Reader®, please refer to the help files included with the software.
               
    The information provided in the electronic versions of the Road and Bridge Standards is a product of and copyrighted by the Virginia Department of Transportation (VDOT) and is intended to be used for informational purposes only and is not to be sold or otherwise distributed for profit.  Although this data has been tested by the Virginia Department of Transportation, no expressed or implied warranties are made by VDOT concerning the accuracy, completeness, reliability, and usability of this information.  The Virginia Department of Transportation assumes no responsibility for any incorrect outcomes or damage resulting from the use of this information.  All users shall expressly hold the Virginia Department of Transportation harmless from any liability or loss due to a virus or any other computer or software generated problem associated with these files.

    To order the published version of the 2008 Road and Bridge Standards, please complete and submit a copy of the Publication Sales Form
                      
    If you have any questions or comments regarding this version of the 2008 Road and Bridge Standards, please contact one of the following individuals:
                     

    Charles W. Patterson, P.E.
    Standards and Special Design Section Manager
    Chuck.Patterson@VDOT.Virginia.gov
    (804) 786-1805

    Matthew T. Cross
    Standards Engineer
    Matthew.Cross@VDOT.Virginia.gov
    (804) 786-2577

    William M. "Matt" Barret
    Standards and Special Design Engineer
    Matt.Barret@VDOT.Virginia.gov
    (804) 371-2788


    If you have any technical questions or problems with the files contained on this webpage (e.g. problems with Internet Explorer, Adobe Reader, etc.) please contact the Location & Design helpdesk at (804) 786-1280 or 1-888-683-0345

Page last modified: Oct. 24, 2014